< >

LASER BOARD- RD6442

LASER TABLE

RD6442 system is the classic generation of laser engraving/cutting control system developed by RD Technology, the control system has better hardware stability, anti-high voltage, anti-static interference characteristics. System, based on 3.5-inch color screen, has more friendly operating interface and more powerful functions. The controller includes more perfect and excellent motion control function, large capacity file memory, more compatible dual independent adjustable laser power control interface, more compatible U disk driver, multi-channel general/special IO control, and PC communication support Ethernet communication and USB communication automatic optional.

Download the brochure Download Gravotech Overview

4-axis offline laser engraving and cutting card RDC6442G

Technical Parameters:

1. Digital laser control signal;

2. TTL level output, 50mA drive capability;

3. The PWM frequency is adjustable from 2K to 50K;

4, PWM duty cycle is adjustable from 1% to 99%;

5. Motor control signal OC output, 300mA drive capability;

6. Motor control pulse frequency is up to 500KHZ;

7, USB maximum transmission rate of 12M, the longest distance of 5 meters;

8. Linear / circular / B-spline interpolation accuracy +/- 0.5 pulse;

9, 4 general-purpose photoelectric isolation OC gate output, maximum 500mA drive capability (with continuous current protection);

10, 4 universal photoelectric isolation inputs, compatible with 5V / 12V / 24V logic level;

Function description:

1. Ethernet (10 / 100M) and USB2.0 transmission, the controller automatically queries the communication mode;

2. True color TFT screen, which can display true color processing graphics on the panel, and can accurately know the coordinate position of laser head processing on the panel;

3. The status bar can indicate the border size of the current file, the network connection status, etc.

4. The file graphics saved in the memory can be previewed on the panel, and the speed of swiping the screen is unmatched by domestic manufacturers;

5. Dynamic display of processing trajectory and coordinate points;

6. Dynamically display the processing progress bar of the entire graphic;

7. The processing parameters (such as speed, power, etc.) of each layer can be directly modified on the operation panel, and the modified layer parameters can be automatically saved for subsequent use (this function cannot be implemented by other manufacturers) ;

8. Support power-off and continuous carving, working hours preview (accurate to the millisecond level, the working hours preview value is exactly the same as the actual work time, this function cannot be achieved by other manufacturers);

9, support for feeding, lifting, rotary engraving, left and right push plate and other functions;

10. The RDC644XG system is the latest generation laser engraving / cutting control system developed by Ruida Technology. The control system has better hardware stability and better resistance to high voltage and static electricity.

11. The controller uses a more complete and optimized motion control algorithm, and its processing speed and efficiency are unmatched by previous systems;

Specifications:

RDC644XG

6: The sixth generation of controller

4: Controller version number

4: 4-axis card

X: display type (1: TTF character screen; 2: 3.5-inch color screen; 3: 5.7-inch color screen; 4: 7-inch touch screen)

G: Standard function

REQUEST A DEMO

Support

We offer the solutions for the installation and commissioning of your equipment that fit to your settings and expectations.